Road, Drive and Pothole Repair

Resiplast Polyac® System for Rapid Road, Drive and Pothole Repair

The Resiplast Ployac® System provides an extremely fast and long lasting solution for the repair of bituminous surfaces such as roads, driveways and potholes.  Due to its fast curing time and the ability to apply the products even at low temperatures, repairs can be carried out with minimal disruption and can be returned to service in as little as one hour.

pothole repair image

Repairing Cracks, Passive Joints and Saw Cuts

1. Clean the area to be repaired:

° Remove all loose material.

° Remove any weeds and dirt.

° Thoroughly blow out the area using compressed air to ensure that it is clean and dry.

2. Prepare POLYAC® BDM–M in accordance with the Technical Data Sheet and used to fill cracks, passive joints or saw cuts.

Polyac_system_repairing_cracks

Polyac® System for Repairing Cracks in Bituminous Surfaces
Repairing Potholes

1. Clean the pothole:

° Remove all loose material.

° Remove any weeds and dirt.

° Thoroughly blow out the area using compressed air to ensure that it is clean and dry.

2. Apply POLYAC® 14 primer. Depending on the ambient temperature and the subsoil the filler can then be applied within one hour.

3. Prepare POLYAC® BDM–M in accordance with the Technical Data Sheet. Mix 1 part or prepared POLYAC® BDM – M with 3 to 4 parts of coarse sand or aggregate and subsequently fill the holes.

4. Broadcast coarse granulate, type Bauxite or Mandurax (3-5mm). Depending on the subsoil and the ambient temperature this should be done within 5 to 10 minutes of applying the filling substance (Step 3).

Polyac_system_pothole_repair

Polyac® System for Repairing Potholes

 

Downloads