Total Wall Care Stabiliser protects and consolidates both silicate matrix and carbonate matrix stone materials, such as: sandstone, clay brick, brick, soft or compact limestone, marble, plasters, terracotta. It protects materials by limiting water absorption and it also improves surface cohesion of the stone.
Available in 1L, 2.5L and 5L
Part of the Total Wall Care range of cleaners and protectants.
Protective, consolidating product based on acrylate siloxane copolymers.
The protective function is given by the silicon compounds which significantly alter the angle of contact in the support, giving the stone surfaces a marked degree of water-repellency as a result. The special formulation also provides a little degree of consolidation which can contrast any surface dusting.
Suitable for medium intensity consolidation and to protect the surface of both silicate matrix and carbonate-matrix stone materials, such as sandstone, clay brick, brick, soft or compact limestone,
marble, plaster, terracotta.
The product protects materials effectively by limiting water absorption, and also improves surface cohesion of the stone thanks to the additional consolidation effect. This makes the stone materials more resistant to frost, to exposure in coastal/sea areas, and to all deterioration processes in which water is the main catalyst. The product also prevents biodeteriorating agents such as moss and lichen from taking root; it is an extremely effective means of protection against acid rain and other pollutants, and stops porous materials from trapping dirt thereby keeping the surface clean.
- Powerful water-repellent
- Consolidating action
- Deep penetrating product thanks to the type of solvent used
- Contains low toxicity solvent
- Will not alter the original colour of the support after application
- Non film-forming
- Minor reduction of water vapour permeability
0.2 – 0.8 l/m² depending on the porosity of the support.
- Physical state
- 1 - 20 mPa·s
- 0.81 g/cm³
- Application temp.
- +5°C to +30°C